 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SBR02M30LP 0.2A SBR(R) Super Barrier Rectifier Features NEW PRODUCT * * * * * * * Ultra Low Leakage Current Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 175C Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Mechanical Data * * * * * * * * Case: DFN1006-2 Case Material: Molded Plastic, "Green" Molding compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Polarity Indicator: Cathode Dot Terminals: Finish - NiPdAu annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.001 grams (Approx.) Maximum Ratings @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 2) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Symbol VRRM VRWM VRM VR(RMS) IO IFSM RJS RJA TJ, TSTG Value 30 21 0.2 5.0 18 263 -65 to +175 Unit V V A A C/W C Electrical Characteristics @ TA = 25C unless otherwise specified Characteristic Reverse Breakdown Voltage (Note 4) Symbol V(BR)R Min 30 Typ 0.50 0.42 0.57 0.51 0.1 46 Max 0.54 0.45 0.61 0.54 0.5 150 Unit V Test Condition IR = 400 A IF = 0.1A, TJ = 25C IF = 0.1A, TJ = 150C IF = 0.2A, TJ = 25C IF = 0.2A, TJ = 150C VR = 30V, TJ = 25C VR = 30V, TJ = 150C Forward Voltage Drop VF - V Leakage Current (Note 4) Notes: IR - A 1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. 2. Theoretical RJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Short duration pulse test used to minimize self-heating effect. _________ SBR is a registered trademark of Diodes Incorporated. SBR02M30LP Rev. 3 - 2 1 of 4 www.diodes.com May 2007 (c) Diodes Incorporated SBR02M30LP NEW PRODUCT 100 IF(AV), AVERAGE FORWARD CURRENT(A) f=1.0MHz 0.25 Note 3 CT, TOTAL CAPACITANCE (pF) 0.2 0.15 10 0.1 0.05 1 0 0 5 10 15 20 25 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance 30 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (C) Fig. 4 Forward Current Derating Curve 200 0.4 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 0.3 TJ =150C 0.2 0.1 0 0 0.1 0.2 0.3 0.4 0.5 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation SBR02M30LP Rev. 3 - 2 2 of 4 www.diodes.com May 2007 (c) Diodes Incorporated SBR02M30LP Package Outline Drawing TOP VIEW DFN1006-2 Dim Cathode Indicator NEW PRODUCT Min Max Typ 0.95 1.075 1.00 0.55 0.675 0.60 0.45 0.55 0.50 0.20 0.30 0.25 0.47 0.53 0.50 0 0.05 0.03 0.40 A B C D G G H H N R A 0.05 0.15 0.10 All Dimensions in mm R B C D N Marking, Polarity, Weight & Ordering Information Case Style SBR02M30LP (DFN1006-2) Marking Weight 23 Top View Back View 0.001g (approx.) Ordering Information SBR02M30LP-7 3000/Tape & Reel Date Code 23 = Product Type Marking Code Dot Denotes Cathode Side SBR02M30LP Rev. 3 - 2 3 of 4 www.diodes.com May 2007 (c) Diodes Incorporated SBR02M30LP Suggested Pad Layout NEW PRODUCT IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR02M30LP Rev. 3 - 2 4 of 4 www.diodes.com May 2007 (c) Diodes Incorporated |
Price & Availability of SBR02M30LP-7
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |